The Z32 HK utilizes much of the technology of our popular Z326 series, with a larger and more powerful motor drive, providing increased speed up to 20,000 rpm (38,007 xg). With 16 available rotor options, the Z32 HK is not only ideal for high speed separations, it would also be classified as a “universal” centrifuge, offering economy angled and swinging bucket rotors for lower speed applications. Tubes from 0.2ml up to 85ml can be accepted, and rotors can quickly be exchanged without any required programming, utilizing the instant rotor identification system.
Despite an impressive capacity of up to 4 x 145ml (or 6 x 85ml), the Z32-HK is surprisingly compact. The refrigeration system is conveniently located behind the rotor chamber, resulting in narrow design of less than 16 inches wide. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust accel/decel rates, and change the end of run alarm tone.
**Rotor not included: Choose from rotor options below in "Related Products" section
Features
• Simple one handed operation
• Easy to program with gloves on
• Splash proof digital display
• Permanent indication of Preset and Actual Values
• Selection of speed in both rpm and g-force, with increments of 10
• 10 acceleration and 10 deceleration rates, Possibility of unbraked deceleration
• Preselection of the temperature from - 20°C to 40°C with 1°C increments
• Indication of the sample temperature
• Pre-cooling program option Standstill cooling
• Pre-selection of running time from 10 s to 99 h 59 min or continous
• Storage of up to 99 runs incl. rotor type
• Quick-key for short runs
• Diagnostic program
• Timer: the centrifuge starts at the preselected time
- Max Capacity:
- 4 x 145 ml (or 6 x 85 ml)
- Speed Range:
- 200 to 20,000 rpm
- Max RCF:
- 38,007 x g
- Refrigerated:
- Yes
- Temp Range:
- -20°C to 40°C
- Timer:
- up to 99 hr, 59min and continuous
- Power:
- 120V/230V, 60HZ, 1200W
- Dimensions:
- 15.7 x 27.5 x 14.1 in.
- Weight:
- 156 lbs
- Control:
- Microprocessor with large LCD display
- Motor:
- Maintenance-free induction drive
- Lid Lock:
- Motor driven
- Rotor Identification:
- Automatic radio-frequency rotor identifi cation system (RFID) with over speed protection, immediately upon rotor insertion
- Noise Level:
- under 65 dBA at max speed
- Chamber Construction:
- Stainless steel
- Imbalance Detection:
- Yes, with automatic cut-off
- Memory:
- up to 99 runs incl. rotor type
- Sample Temperature Indicator:
- Yes
- Acceleration/Deceleration:
- 10 acceleration and 10 deceleration rates
- Indicator:
- Audible signal at the end of each run with several melody options
- Manufacturer:
- Hermle
- Model:
- Z32 HK
- Item No.:
- Z032-HK
- Product Type:
- Centrifuge
